Suitable for all types of cooking equipment whether wall mounted or in an island arrangement. The Exhaust HOOD features a double walled design which allows air to be delivered through slots arranged  along the inner  front  face and if  required inner sides of the canopy to effectively  and efficiently  contain the  thermal  plume  and direct it towards the grease filters.


The EXHAUST HOOD is fabricated entirely in stainless steel0.9mm thick. All visible surfaces are ultra fine grain polished and polythene protected. The EXHAUST HOOD is manufactured depending on the below cooking range. All metal edges are rolled smooth and are free from sharp edges and projections. The HOOD’s lower edge is formed into a condensation channel with inclined internal elevation to simplify cleaning and the inner edges are crush folded for safety purposes. The canopy is equipped with grease extraction baffle filters. The filters are designed to allow the grease to run off the filters into an integral grease collecting channel and then into easily removable grease trays.


Fresh Air Supply provision is made through the louvers on the front Portion of the hoods


Hanging brackets are fitted to the top corners of the canopy for easy installation.


The filter is designed to extract grease from cooking equipment. The semi-circular channel construction of the filter guarantees the highest

attainable grade of grease extraction by creating a centrifugal force in the filter. The grease collects in the lowest part of the filter preventing clogging and maintaining an even extraction over the entire length of the ventilation system.The filters are placed at an angle of approximately 45° in the canopy and are easily removable.


Filters are constructed from stainless without rivets and is provided with two integrated handles formed from the surrounding frame. On the top and bottom the filter 10% is open for the out stream of grease and moisture. The filters are resistant to aggressive detergents.


High grease extraction rate, Solid construction, Entirely constructed of stainless steel Simple to remove without tooling, Easy maintenance in any commercial dish wash machine installation.




The canopies are fitted VAPOUR PROOF light fittings which are specifically comply with the requirements of IP54 and come complete with electrical terminal connection box. The frame is a stainless steel construction and locked into position with stainless steel fasteners.

Standard electrical supply is 220/240V 50Hz.

The below given sizes are standard. We can customise as per requirement. WALL MOUNTED TYPE

Model Dimension (mm) Gross (Kg) Volume (m 3 )
BLHD1200W 1200 X 1050 X 500 50 0.85
BLHD1500W 1500 X 1050 X 500 60 1.10
BLHD1800W 1800 X 1050 X 500 70 1.31
BLHD2100W 2100 X 1050 X 500 80 1.52




Model Dimension (mm) Gross (Kg) Gross (m 3 )
BLHD1800I 1800 X 2100 X 500 140 2.51
BLHD2100I 2100 X 2100 X 500 160 2.90
BLHD2400I 2400 X 2100 X 500 180 3.30